Land Finisher Attachments | Sunflower Tillage Tools

Land Finisher Attachments

Available attachments for Sunflower 6000 Series Land Finishers

Callout Image

High-Residue Six-Row Spike Drag

The high-residue six-row spike drag is designed for heavy residue conditions when using the 6000 Series Land Finisher. The 3/4 x 16-inch round spikes promote a smoother flow of residue, and the round design sheds heavy residue better than conventional square spikes. The combination of individual spike placement and the flexibility offered by individual bars make this drag the number one attachment in high-residue conditions.

Available on 6221, 6333 and 6433.

Callout Image

Five-Row Spike Drag

The five-row spike drag is regarded as our most maintenance-free finishing attachment in lowresidue conditions. Equipped with 3/4 x 11-inch spikes, the flexible bars of the unit are designed to conform to very irregular terrain, and its weight makes it aggressive enough to handle the toughest soil conditions. The 1 3/4-inch spike spacing provides additional incorporation and effectively completes the seedbed by breaking clods, leveling, smoothing and firming the soil.

Available on 6221, 6333 and 6433.

Callout Image

Three-Row Spike Drag and Reel

The three-row spike and reel combination features independence between spike and reel—in fact, each bar of the spike performs independently for maximum conformance to rough terrain. The heavy spike drag levels the soil in advance of the reel. The 10 1/4-inchdiameter reel features six high-carbon spiraled blades, regreaseable bearings and no center shaft for better soil and residue handling capabilities. The aggressive action of this combination pulverizes the soil, provides superior leveling and enhances incorporation, leaving the seedbed in nearly perfect condition.

Available on 6221, 6333 and 6433.

Callout Image

Three-Row Spike and Chopping Reel

The chopper reels are designed with offset blade sections to provide maximum residue management with minimum vibration. The 16-inch-diameter chopper reel is used in combination with a threerow spike drag with 3/4 x 11-inch square spikes on 1 3/4-inch centers for maximum residue management and leveling of the soil surface profile in preparation for planting.

Available on 6221, 6333 and 6433.

Callout Image

Three-Row Coil Tine and Reel

This attachment features a three-row coil-tine section that can be adjusted for the desired pitch as well as height, tilt and spring-loaded down pressure adjustments for various working conditions. A smaller diameter reel revolves at a higher speed, providing a more aggressive digging action for incorporating and preparing the seedbed. The reel features six high-carbon blades that spiral across the 10 1/4-inch-diameter section. The reel is independent from the coil tine and can even be folded up and over when not in use.

Available on 6221, 6333 and 6433.

Callout Image

Reels

Recognizing that some soils may require additional conditioning, finishing reels may be an enhancement in some soil types to the performance of the 6830 by compressing the soil after the rotary spider tines. They also aid in a final mixing of soil surface materials and the final leveling of the soil surface. Available in 14-inch diameter flat-bars or 14-inch diameter round bars with either mechanical or hydraulic down pressure.

Available on the 6800 series only.