Products

‹ View All Products

Features

Frames

The frame is constructed of high strength 4 x 6 x 3/8 inch (102 x 152 x 9.5 mm) steel tube to withstand the high stress of aggressive tillage.

It is cross braced and gusseted for added strength and trouble-free service.

Rigid Frame

Rigid Frame

Flat-Fold Frame

Flat-Fold Frame

Over-Center Frame

Over-Center Frame

Minimum Disturbance Shank

Minimum Disturbance Shank

The minimal disturbance shanks of the Sunflower 4700 Series have a maximum working depth of 20 inches (50.8cm). The shank is made of 1-1/4 inches (31.8 mm) high strength abrasion resistant steel with a chromium carbide shin guard to protect the shank from wear.

Parabolic Shank

Parabolic Shank

The parabolic shanks have a operating depth of 16-inches (40.6 cm). Both shanks are also available in a fixed version with shear bolt protection.

(Shank shown on display stand with 7 with wing cast point and wear guard )

Spring Trip Shank Mount

Spring Trip Shank Mount

The Spring Reset Shank Holder (recommended in rocky conditions) is set at a 3000 pound point load and has eighteen inches of vertical trip height.

 Rigid Shank Mount

Rigid Shank Mount

The Rigid Shank Holder features shear-bolt protection.

Three Year Warranty

Three Year Warranty

Three Year Warranty
All Sunflower Equipment features superior engineering and rugged construction that will withstand the test of time. Simply stated, it's the finest tillage equipment available. We're so confident, we place a three year limited warranty on every tillage tool we build.

(Attachments are not included in this warranty; attachments are covered by a one year limited warranty)